 |
 |
 |
 |
 |
 |
 |
|---|
PRODUCTS |
|
|---|---|
Fire Hydrant Valves - Globe (LP) Type available in 5 configurations (RIGHT-ANGLE, OBLIQUE, OB-NOSE, BIB-NOSE, HORIZONTAL) and with a wide range of inlet & outlet specifications. A range of 65mm nominal diameter 'low-pressure' fire hydrant landing valves suitable for both on-and off-shore applications. |
 |
Pressure Regulating Valves - 'INTEGRAL' |
 |
Pressure Regulating Valves - 'ELEMENT' |
 |
Valves - Micellaneous Outside Screw & Yolk (O.S.& Y.) Heavy Duty Gate Valve. PN20. Inlet flanged or threaded. Outlet: 2.5" Inst Fm. Gunmetal LG2. Outside Screw & Yolk (O.S.& Y.) DN 65mm Heavy Duty Gate Valve. Rated PN20 ( note: with integral 2.5" Inst Fm outlet the maximum working pressure is limited to 15 barg as per BS336.). Gunmetal BS1400 LG2. |
 |
Dry Riser & Foam Equipment DRY RISER mains equipment covered by BS5041 is used to provide efficient fire protection in multi-floor buildings generally from 18 metres to 60 metres high - above 60 metres a WET-RISER system is recommended. |
 |
Branchpipes & Nozzles - (General) including 'COOPERSPRAY' Diffusers and miscellaneous SPECIALIST nozzles. The basic branchpipe according to BS336 has inlet 2.5" Instantaneous male and outlet threaded that1.75" BSP male (Fig 209) for either a plain jet nozzle (Fig 211) or a COOPERSPRAY diffuser nozzle (Fig 204 & 204A). |
 |
Hand-Line Nozzles (Buccaneer range) A range of ultra-modern hand-line nozzles. Single-Gallonage, Multi-Gallonage & Automatic versions in a range of sizes to 1000 lpm. Al.Alloy & Gunmetal versions. The 'BUCCANEER' range of hand-line nozzles represents state-of-the-art design and manufacture at very competitive prices. |
 |
Deluge Nozzles & Equipment Deluge Nozzle for Fixed System fire protection. Flow & spray angle adjustable on-site. DN 3/4" & DN 1" Gunmetal or Stainless Steel. Deluge Nozzle for Fixed System fire protection. Adjustable on site for flow and spray angle. Spray collar incorporates an annular ring of 'fog' teeth to give fine droplet size and full fog cone. Constant flow in all spray positions. Available in Gunmetal LG2 or Stainless Steel 316. |
 |
Delivery Hose Couplings An introduction to Delivery Hose Couplings The INSTANTANEOUS system designated by BS336 is the standard in use with British Fire Services for delivery applications. |
 |
Adaptors Adaptors are used to convert: a) between the same or different sizes in the same connection system. e.g. Instantaneous BS336 (male/female x male/female) STORZ x STORZ Screw thread (male/female x male/female) or b) between different connection systems e.g. Instantaneous BS336 (male/female) x Screw thread (male/female) Instantaneous BS336 (male/female) x Flange Instantaneous BS336 (male/female) x STORZ Screw thread (male/female) x Flange |
 |
Blank Caps & Plugs BLANK CAPS & PLUGS when fitted to inlet/outlet connections are commonly required for one or more of the following purposes:- * to hold pressure * to seal off water supplies * to protect against damage * to prevent ingress of dust or other foreign matter |
 |
Standpipes + Key & Bar STANDPIPES and KEYS & BARS are used to obtain water from a pressurised mains supply via underground hydrants (BS750). |
 |
Suction Equipment & Fittings The standard coupling to BS336 for suction hoses is connected by screw thread with special ROUND THREAD form (BSRT) in nominal sizes 3" (75 mm), 4" (100 mm) and 5.5" (140 mm) and which is also the corresponding nominal hose size. |
 |
Dividing & Collecting Breechings |
 |
Collecting Heads & Manifolds When fitted to the pump of a Fire Appliance, COLLECTING HEADS are used to feed water to the pump from one or more standpipe supplies. |
 |
Pillar Hydrants & Fabrications * up to 3 valved outlets and pumper connection with integral main valve and drain in base. * manufactured in ductile iron with steel/bronze fittings * available for buried depths up to 2.9 metres. * available with connection for monitor. |
 |
Portable Monitors A simple ground monitor with 'Delta' Base. Inlet 2.5" Inst M, Outlet 2.5" Inst Fm (ST), Aluminium Alloy. Rubber feet. |
 |
Fixed Monitors & Oscillators DN80 Pillar Monitor. Inlet flanged to requirements. Handle operation. Material: GUNMETAL BS1400 LG2 * DN80 PN16 fixed system Pillar Monitor * Full 360 deg rotation (handle operated) with position lock. * - 45 to + 85 deg elevation (handle operated) with position lock. * Double row of stainless steel balls in each movement bearing |
 |
Monitor Nozzles - Jet/Fog Type for water Jet/Fog diffuser type for water and foams. Single & Multi gallonage + automatic pressure control versions. Jet/Fog Diffuser Nozzles for Monitors for discharge of water or non-aspirated foams are available in 3 basic types:- In all cases the stream can be varied in operation from JET through to a wide FOG pattern. |
 |
Monitor Nozzles - Foam Pipes Low Expansion Foam Pipe. Available with or without self-induction and in a range of flow capacities. Al.Alloy, hard anodised & with barrel epoxy painted red. Low Expansion Foam Pipe. c/w pressure gauge. For use with 5% pre-mix foam solution. Aluminium alloy, hard anodised & barrel epoxy painted red. Flow rates stated at 7 barg. |
 |
Portable Foam Equipment ULTRA-LIGHT In-Line Foam Inductor for 'Buccaneer' hand-line nozzles. With by-pass for water or foam. Al.Alloy, hard anodised + PTFE impreg. The 'ULTRA-LIGHT' in-line Inductor is designed to fit to the inlet of hand-line nozzles (Buccaneer range) to provide flows of either water or non-aspirated foam but can equally be used as an in-line device to induct foam solution for conventional aspirating foam branchpipes. |
 |
Micellaneous Equipment Portable Electronic Flowmeter. Range of models from DN40 (43 to 777 lpm) to DN150 (535 to 9869 lpm). Flow & pressure measurement + totalisation. Portable Electronic Flowmeter. Flow measurement based on Venturi principle and with pressure sensors and flow totalisation and with zero resets. |
 |
Copyright © William Eagles Limited 2010